BD 2477-0007 - Alaris Pump Module Set Non-Vented with 180 Micron Filter, SmartSite Needle-Free Valve, 15 Drop/mL, 121 Inch Sterile Infusion Set, 10/CS (Continental US Only)
The BD 2477-0007 Alaris Pump Module Set is a sterile, non-vented administration set designed for use with compatible BD Alaris infusion systems. This comprehensive infusion set features a 180-micron filter, roller clamp, two slide clamps, one SmartSite needle-free valve positioned 65 inches below the pumping segment from the 2-piece male Luer Lock connector, a 15 drop/mL drip factor, 121-inch overall tubing length, and a 308 cm fluid path volume.
Manufactured without DEHP, this administration set supports controlled medication and fluid delivery while providing features that enhance infusion management, line access, and filtration. The sterile fluid pathway helps maintain product integrity and supports infection prevention efforts throughout the infusion process.
| Manufacturer | 2477-0007 |
| Application | IV Pump Set |
| Connection Type | Male Luer Lock Connector |
| Drip Rate | 60 Drops / mL Drip Rate |
| Spike Type | Non-Vented Spike |
| Type | Blood |
Key Benefits
The BD 2477-0007 incorporates a 180-micron filter designed to help filter particulate matter from infusion fluids before administration. The non-vented design is suitable for use with flexible IV containers and other compatible fluid delivery systems.
The integrated SmartSite needle-free valve provides convenient needle-free access for medication administration, line management, and infusion adjustments while helping support sharps injury prevention initiatives.
The roller clamp and dual slide clamps provide additional control during priming, setup, transport, and infusion management. The DEHP-free construction supports healthcare facilities seeking infusion products that are not made with DEHP.
The extended 121-inch tubing length offers flexibility for patient positioning and equipment placement across a variety of clinical environments.
Compatibility and Applications
The BD 2477-0007 Alaris Pump Module Set is designed for use with compatible BD Alaris Pump Module systems. Healthcare facilities should verify compatibility with specific Alaris pump models, software configurations, and institutional infusion protocols before implementation.
Typical applications include medication administration, hydration therapy, maintenance fluid delivery, critical care infusions, specialty medication administration, perioperative care, oncology treatments, and general inpatient infusion therapy.
This administration set is commonly utilized in hospitals, intensive care units, medical-surgical departments, oncology clinics, ambulatory infusion centers, emergency departments, and specialty treatment facilities.
Usage Guidelines
The BD 2477-0007 should be used only by trained healthcare professionals following manufacturer instructions, institutional policies, and prescribed infusion protocols. Prior to use, inspect the packaging to verify sterility, integrity, and expiration date.
Prime the administration set according to manufacturer recommendations and facility procedures to remove air from the fluid pathway. Verify proper function of the roller clamp, slide clamps, filter, and SmartSite needle-free valve before initiating therapy.
Ensure all connections are secure and confirm appropriate pump programming before beginning infusion. Monitor the infusion regularly throughout administration and replace the set according to facility guidelines and medication-specific requirements.
Certifications and Safety Standards
The BD 2477-0007 Alaris Pump Module Set is manufactured under established medical device quality management systems and is designed to support safe infusion practices in professional healthcare settings.
The sterile fluid pathway, needle-free access technology, filtration component, and DEHP-free construction support healthcare facility infection prevention, sharps safety, and material safety initiatives. Facilities should review current product labeling and regulatory documentation before implementation.
Comparison with Competitor Products
Compared with basic administration sets, the BD 2477-0007 provides enhanced functionality through the inclusion of a 180-micron filter, SmartSite needle-free valve, roller clamp, and dual slide clamps.
Compared with infusion sets lacking needle-free access, the integrated SmartSite valve allows convenient line access while helping reduce reliance on needles during medication administration and line maintenance.
The combination of DEHP-free materials, extended tubing length, filtration capability, and Alaris system compatibility makes this set well suited for a broad range of infusion therapy applications.
Typical User Profile and Application Scenarios
The BD 2477-0007 is commonly used by infusion nurses, critical care clinicians, oncology specialists, anesthesia providers, pharmacists, vascular access professionals, and other healthcare personnel responsible for medication and fluid administration.
Typical applications include critical care infusions, oncology medication delivery, maintenance fluid therapy, perioperative care, specialty medication administration, inpatient treatment protocols, and outpatient infusion services.
Best Practices for Use and Maintenance
Store the BD 2477-0007 in a clean, dry environment according to manufacturer recommendations. Maintain the administration set in its original sterile packaging until ready for use.
Use aseptic technique during setup and connection. Properly prime the tubing, verify secure Luer Lock connections, confirm SmartSite valve integrity, and ensure accurate pump programming before initiating therapy.
This administration set is intended for single-patient use only and should not be reused, reprocessed, or resterilized. Replace the set according to institutional protocols, medication-specific requirements, and manufacturer guidance.
Regulatory and Safety Information
The BD 2477-0007 Alaris Pump Module Set is intended for professional healthcare use only. It should be used with compatible Alaris infusion systems and according to manufacturer instructions, facility policies, and applicable healthcare regulations.
Healthcare personnel should follow standard precautions, medication safety procedures, infusion pump programming protocols, infection prevention standards, and IV therapy best practices throughout administration.
All used administration sets should be disposed of according to facility policies and biomedical waste regulations.
How to Order
Select the BD 2477-0007 Alaris Pump Module Set Non-Vented with 180 Micron Filter, Roller Clamp, Two Slide Clamps, SmartSite Needle-Free Valve, 2-Piece Male Luer Lock, Not Made with DEHP, 15 Drop/mL Drip Factor, 121 Inch Length, 308 cm Fluid Path, and Sterile Construction and add it to your cart. Complete checkout with your preferred shipping and payment options. For bulk orders, quotes, product availability, or further assistance, contact CIA Medical customer service at (312) 275-5850 or use the contact form on this page.
