BD 305110 - Needle Disposable Intraderm 26x3/8" 100/BX, 10 BX/CS
305110 - 26 G BD Needle 3/8 in. Single use, Sterile
BD HYPODERMIC NEEDLE is sharp, tri-beveled stainless steel needles are with non-coring design. Unique grinding and polishing process enhances the sharpness for ease of penetration. The needles feature universal fit, triple sharpened, sterile and are color coded hubs for easy identification.
- PrecisionGlide stainless-steel needles with translucent, color-coded, polypropylene hubs.
- Can also be sterilized with ethylene oxide (EtO) in their individual, easy-to-peel blister package.
- Intradermal bevel.
Key Product Features
|Needle Gauge||26 G|
|Needle Gauge (m)||0.45 mm|
|Needle Length (in.)||3/8 in.|
|Needle Length (m)||9.53 mm|
|Needle Tip Type||Intradermal|
|Needle Wall Type||Regular|
|Total Shelf Life||1825|
|Type Of Bevel||Regular|
|BPA Free||Not made with BPA|
|DEHP Free||Not made with DEHP|
|Latex Statement||Not made with natural rubber latex|
|Single Use||Product is for single use only|
Types of Needle Walls and Bevels
The Thin Wall needle is thinner than a Regular Wall needle. The inner diameter is bigger without any increase in the outside diameter. For example, a 21 G Thin Wall needle has the same outside diameter as a 21 G Regular Wall, but has the same inner diameter as a 20 G needle. Thin Wall allows the same flow volume as a Regular Wall needle one gauge larger.
305110 Regular Wall
This is the most common wall thickness. The thickness of the steel wall allows a good flow rate, and minimizes flexing when the needle is inserted into a vial stopper or patient.
305110 Intradermal Bevel
The geometry of the tip is designed to allow for shallow and low angle insertion of the needle just below the epidermis. The fluid volume is typically very small and slowly administered. This unique needle bevel is used primarily for skin testing (e.g., allergy tests).
Stainless Steel Needle
Made of stainless steel, which is siliconized to allow easier penetration, thus minimizing patient discomfort. Available in different lengths and gauges to suit individual clinical and patient needs.
BD Conventional Needle & Syringe Color Chart
|What MRI safety information does the labeling contain?||Labeling does not contain MRI Safety Information|
|Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437)||No|
|Device labeled as "Not made with natural rubber latex"||No|
|Prescription Use (Rx)||Yes|
|Over the Counter (OTC)||No|
|Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P)||No|
Product Packaging Information
|Length||116.0 mm||451.0 mm|
|Width||90 mm||181.0 mm|
|Height||82 mm||129.0 mm|
|Weight||173.7 g||1.737 g||1.737 kg|