BD 305128 - NEEDLE 30X1, 1000/CS
305128 - 30 G BD Needle 1 in. Single use, Sterile
BD Precisionglide Regular Bevel Specialty Use Needles offer advanced performance and help enhance patient satisfaction. These Needles group is designed to address specific injection requirements and includes unique length options. For enhanced clinical efficiency the needles are sterile, single use products.
- PrecisionGlide stainless-steel needles with translucent, color-coded, polypropylene hubs.
- Can also be sterilized with ethylene oxide (EtO) in their individual, easy-to-peel blister package.
- Regular wall, regular bevel.
- Address Specific Injection Requirements
- Enhance Patient Experience
- Sterile, Single Use for Maximized Efficiency
Key Product Features
|Needle Gauge||30 G|
|Needle Gauge (m)||0.30 mm|
|Needle Length (in.)||1 in.|
|Needle Length (m)||25.40 mm|
|Needle Tip Type||Regular|
|Needle Wall Type||Regular|
|Total Shelf Life||1825|
|Type Of Bevel||Regular|
|BPA Free||Not made with BPA|
|DEHP Free||Not made with DEHP|
|Latex Statement||Not made with natural rubber latex|
|PVC Free||Not made with PVC|
|Single Use||Product is for single use only|
Types of Needle Walls and Bevels
The Thin Wall needle is thinner than a Regular Wall needle. The inner diameter is bigger without any increase in the outside diameter. For example, a 21 G Thin Wall needle has the same outside diameter as a 21 G Regular Wall, but has the same inner diameter as a 20 G needle. Thin Wall allows the same flow volume as a Regular Wall needle one gauge larger.
305128 — Regular Wall
This is the most common wall thickness. The thickness of the steel wall allows a good flow rate, and minimizes flexing when the needle is inserted into a vial stopper or patient.
305128 — Regular bevel
Regular bevel: The most common bevel, used for a vast majority of applications. Typically used for intramuscular and subcutaneous injections
Stainless Steel Needle
Made of stainless steel, which is siliconized to allow easier penetration, thus minimizing patient discomfort. Available in different lengths and gauges to suit individual clinical and patient needs.
BD Conventional Needle & Syringe Color Chart
|What MRI safety information does the labeling contain?||Labeling does not contain MRI Safety Information|
|Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437)||No|
|Device labeled as "Not made with natural rubber latex"||No|
|Prescription Use (Rx)||Yes|
|Over the Counter (OTC)||No|
|Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P)||No|
Product Packaging Information
|Length||116.0 mm||451.0 mm|
|Width||90.0 mm||181.0 mm|
|Height||82.0 mm||129.0 mm|
|Weight||156.0 g||1.56 g||1.56 kg|