BD MPX5300-C - Pressure Rated Extension Set with MaxPlus Clear Needleless Connector, Y-Site, 9 Inch Length, 1.2 mL PV, 50/CS (Continental US Only)

BD MPX5300-C - Pressure Rated Extension Set with MaxPlus Clear Needleless Connector, Y-Site, 9 Inch Length, 1.2 mL PV, 50/CS (Continental US Only)

The BD MPX5300-C Pressure Rated Extension Set is a sterile IV extension set designed to support safe, efficient fluid and medication administration in clinical environments. It features a MaxPlus Clear needleless connector, pinch clamp, needleless Y-site, male spin luer lock, 9 inch tubing length, and 1.2 mL priming volume. BD lists this product as a pressure-rated MaxPlus extension set with purple-striped standardbore tubing, bonded connector, NAC-y Y-site port, sterile content, and a pressure rating of 325 psi. :contentReference[oaicite:0]{index=0}

This extension set helps clinicians extend IV access while maintaining a secure, needle-free connection point for infusion therapy. The short 9 inch configuration is suitable for setups where additional line length is needed without adding unnecessary tubing volume. Its 1.2 mL priming volume supports predictable fluid management, while the pinch clamp allows quick flow control during setup, administration, and line changes.

Key Benefits

• Supports needle-free access to help reduce unnecessary needle handling during IV therapy.
• Pressure-rated design makes it appropriate for compatible infusion applications requiring higher pressure tolerance.
• MaxPlus Clear connector supports visual inspection at the connection point.
• Needleless Y-site provides an additional access point for compatible medication or fluid administration.
• Male spin luer lock helps create a secure connection with standard compatible IV access devices.
• Sterile, single-use design helps reduce contamination risk when used according to facility protocol.
• Short 9 inch tubing length helps minimize excess line bulk while providing practical extension from the catheter site.
• Not made with natural rubber latex, supporting use in latex-sensitive clinical environments. :contentReference[oaicite:1]{index=1}

Compatibility and Applications

The BD MPX5300-C is intended for use with compatible IV administration systems, catheter setups, infusion pumps, and luer lock access devices where a pressure-rated extension set is required. Its male spin luer lock connection supports secure attachment to compatible female luer access points, while the needleless Y-site provides added access flexibility.

This product is commonly relevant for hospitals, outpatient clinics, infusion centers, emergency departments, surgical centers, and specialty care settings where clinicians need controlled IV extension access for medication delivery, fluid administration, flushing, or line management. McKesson also categorizes the product as a sterile MaxPlus Clear standard bore IV extension set with spin-lock connector, pinch clamp, needle-free port, 1.2 mL priming volume, and pressure-rated type. :contentReference[oaicite:2]{index=2}

Usage Guidelines

• Inspect the package before use and do not use the set if the sterile barrier is damaged, opened, or compromised.
• Use aseptic technique during handling, priming, connection, and disconnection.
• Prime the extension set fully before connection to help remove air from the line.
• Confirm compatibility with the catheter, IV administration set, infusion device, medication, and facility protocol before use.
• Use the pinch clamp as directed to control flow during setup and line handling.
• Disinfect the needleless connector according to institutional policy before each access.
• Do not reuse or resterilize; this is intended as a sterile, single-use disposable medical device.
• Refer to BD product labeling, instructions for use, and facility policies for complete clinical guidance.

Certifications, Safety Standards, and Regulatory Approvals

BD identifies the MPX5300-C as sterile content, not made with natural rubber latex, manufactured in Mexico, registered with Health Canada, and not CE marked. BD also lists a case quantity of 50 and product identifiers including GTIN case 50885403237216 and GTIN each 10885403237218. :contentReference[oaicite:3]{index=3}

For US purchasing and clinical procurement, buyers should verify current FDA listing, facility requirements, and applicable purchasing documentation directly through BD or the authorized distributor. The absence of CE marking on BDs listing should be considered when purchasing for markets that require CE-marked products.

Comparison with Competitor Products

The BD MPX5300-C should be compared primarily with other sterile IV extension sets, not with the B Braun N2150 Spike Adapter. The B Braun N2150 is an irrigation container spike adaptor designed to permit connection of a non-vented IV spike to a plastic irrigation container, which makes it a different product category and not a direct substitute for a pressure-rated IV extension set. :contentReference[oaicite:4]{index=4}

Compared with general IV extension sets, the BD MPX5300-C offers a strong combination of pressure-rated performance, needleless access, a MaxPlus Clear connector, 9 inch short extension format, pinch clamp flow control, and a needleless Y-site. Some alternatives may offer longer tubing, different clamp styles, or small-bore configurations, but they may not provide the same combination of pressure rating, standardbore tubing, bonded MaxPlus Clear connector, and Y-site access.

For healthcare teams already using BD MaxPlus compatible infusion components, the MPX5300-C can help standardize supplies and simplify staff familiarity. For procurement teams, the 50 per case packaging also supports inventory planning for high-use clinical departments.

Typical User Profile and Application Scenarios

The typical users of the BD MPX5300-C include nurses, infusion specialists, emergency department clinicians, anesthesia teams, outpatient infusion staff, vascular access teams, and other trained healthcare professionals responsible for IV therapy setup and maintenance.

Typical application scenarios include short-line IV extension, medication administration through a compatible needleless Y-site, pressure-rated infusion setup where appropriate, catheter access management, and clinical environments where a sterile, disposable, needle-free extension set is preferred.

Best Practices for Use and Maintenance

• Store in a clean, dry, temperature-appropriate medical supply area according to manufacturer and facility requirements.
• Rotate stock by expiration date to support inventory control and reduce waste.
• Keep the product in its original packaging until ready for use.
• Use only with compatible IV devices, medications, and pressure settings.
• Trace IV lines before connection or administration to help prevent misconnections.
• Scrub and disinfect the needleless connector according to facility policy before each access.
• Replace the extension set according to institutional IV therapy protocols, product labeling, and patient-specific clinical requirements.
• Dispose of after use in accordance with medical waste policies.

Regulatory and Safety Information

The BD MPX5300-C is a sterile, single-use IV extension set designed for professional healthcare use. BD lists the product as pressure rated to 325 psi, with standardbore tubing, one MaxPlus Clear connector, one Y-site, pinch clamp, spin male luer lock, and no natural rubber latex. :contentReference[oaicite:5]{index=5}

Use should be limited to trained personnel following accepted IV therapy standards, manufacturer instructions, and facility policies. Do not use if packaging is damaged, if product integrity is questionable, or if the device is not compatible with the intended infusion setup. Always confirm pressure limits, connector compatibility, and medication compatibility before use.

How to Order

Select the BD MPX5300-C Pressure Rated Extension Set, MaxPlus Clear Needleless Connector, Pinch Clamp, Needless Y-Site, Male Spin Lock, 9" Length, 1.2 mL PV and add it to your cart. Complete checkout with your preferred shipping and payment options. For bulk orders, quotes, or further assistance, contact CIA Medical customer service at (312) 275-5850 or use the contact form on this page.