BD MZ5302 - Pressure Rated Minibore Extension Set with Removable MaxZero Needle-Free Connector, Slide Clamp, 7 Inch Length, 0.4 mL Priming Volume, 50/ (Continental US Only)

BD MZ5302 - Pressure Rated Minibore Extension Set with Removable MaxZero Needle-Free Connector, Slide Clamp, 7 Inch Length, 0.4 mL Priming Volume, 50/ (Continental US Only)

The BD MZ5302 Pressure Rated Minibore Extension Set is a sterile IV extension set designed for vascular access management, medication administration, and compatible pressure-assisted infusion procedures in professional healthcare settings. This configuration features one removable MaxZero needle-free connector, a slide clamp, a Spin Male Luer Lock connector, a 7-inch minibore tubing length, and an ultra-low 0.4 mL priming volume. The extension set is manufactured without DEHP, supporting healthcare facilities that prefer DEHP-free infusion components.

The pressure-rated minibore design combines low residual fluid volume with secure needle-free access, making it well suited for routine IV therapy, vascular access maintenance, and compatible pressure-assisted applications where compact tubing and precision fluid delivery are important.

Key Benefits

The pressure-rated construction supports use in compatible pressure-assisted infusion procedures when used according to manufacturer recommendations.

The removable MaxZero needle-free connector provides convenient needle-free access for medication administration, flushing, and vascular access maintenance while helping reduce sharps exposure risks.

The ultra-low 0.4 mL priming volume helps minimize residual medication and fluid within the extension set.

The minibore tubing supports efficient low-volume infusion while maintaining a compact fluid pathway.

The slide clamp provides manual flow control during setup, priming, transport, and infusion management.

The DEHP-free construction supports healthcare facilities seeking infusion products manufactured without DEHP-containing materials.

Compatibility and Applications

The BD MZ5302 Extension Set is compatible with standard Luer Lock IV systems, compatible vascular access devices, infusion pumps, administration sets, syringes, and pressure-rated infusion systems approved for use with the extension set.

Typical applications include IV medication administration, saline flushing, vascular access maintenance, specialty infusion therapy, pressure-assisted infusion procedures, emergency care, critical care treatment, outpatient infusion therapy, and diagnostic imaging workflows using compatible equipment.

This extension set is commonly used in hospitals, emergency departments, critical care units, radiology departments, infusion centers, outpatient clinics, and ambulatory care facilities.

Usage Guidelines

Use the BD MZ5302 only by trained healthcare professionals following manufacturer instructions, institutional policies, and accepted infusion therapy standards. Before use, inspect the packaging to verify sterility, integrity, expiration date, and product suitability for the intended application.

Prime the extension set according to facility procedures and remove all air from the fluid pathway before patient connection. Verify secure attachment of the Spin Male Luer Lock connector, ensure proper operation of the slide clamp, and disinfect the MaxZero needle-free connector before each access.

When used in pressure-assisted procedures, always operate within the manufacturer's specified pressure limits and verify compatibility with the intended infusion or imaging equipment.

Certifications and Safety Standards

The BD MZ5302 Extension Set is manufactured under established medical device quality management systems and is intended to support safe infusion and vascular access practices in healthcare environments.

The sterile fluid pathway, pressure-rated construction, MaxZero needle-free connector technology, and DEHP-free materials support healthcare facility initiatives related to medication safety, infection prevention, and vascular access management.

Comparison with Competitor Products

Compared with standard extension sets that are not pressure rated, the BD MZ5302 is designed for compatible pressure-assisted infusion procedures.

Compared with extension sets featuring larger fluid volumes, the ultra-low 0.4 mL priming volume helps reduce medication waste and residual fluid.

The removable MaxZero connector offers additional flexibility for line management compared with permanently bonded connector configurations while maintaining secure needle-free access.

Typical User Profile and Application Scenarios

The BD MZ5302 is commonly used by infusion nurses, vascular access specialists, radiology professionals, emergency department clinicians, critical care staff, anesthesiologists, and other healthcare personnel responsible for IV therapy and compatible pressure-assisted procedures.

Typical applications include medication administration, saline flushing, vascular access maintenance, specialty infusion therapy, emergency treatment, compatible diagnostic imaging procedures, and routine IV line management.

Best Practices for Use and Maintenance

Store the BD MZ5302 in a clean, dry environment according to manufacturer recommendations. Keep the extension set in its original sterile packaging until ready for use.

Use aseptic technique during setup and connection. Properly prime the tubing, disinfect the MaxZero connector before each access, verify slide clamp functionality, and ensure all Luer Lock connections remain secure throughout therapy.

This extension set is intended for single-patient use only and should not be reused, reprocessed, or resterilized. Replace the set according to institutional protocols and manufacturer recommendations.

Regulatory and Safety Information

The BD MZ5302 Extension Set is intended for professional healthcare use only. It should be used according to manufacturer instructions, facility policies, vascular access guidelines, and applicable healthcare regulations.

Healthcare personnel should follow standard precautions, medication safety procedures, infection prevention practices, pressure-rated system requirements, and vascular access protocols throughout use.

Dispose of the used extension set according to facility policies and applicable biomedical waste regulations.

How to Order

Select the BD MZ5302 Pressure Rated Minibore Extension Set with One Removable MaxZero Needle-Free Connector, Slide Clamp, Spin Male Luer Lock, DEHP-Free Construction, 7 Inch Length, 0.4 mL Priming Volume, and Sterile Fluid Path and add it to your cart. Complete checkout with your preferred shipping and payment options. For bulk orders, quotes, product availability, or further assistance, contact CIA Medical customer service at (312)275-5850 or use the contact form on this page.