BD MZ5303 - MaxZero Pressure Rated Standard Bore Extension Set with Bonded Needle-Free Connector, 7 Inch Length, 0.5 mL Priming Volume

BD MZ5303 - MaxZero Pressure Rated Standard Bore Extension Set with Bonded Needle-Free Connector, 7 Inch Length, 0.5 mL Priming Volume

The BD MZ5303 MaxZero Extension Set is a sterile pressure-rated standard bore IV extension set designed for medication administration, vascular access management, and contrast media delivery with compatible low-pressure power injectors. This configuration includes one bonded MaxZero needle-free connector, one pinch clamp, a Spin Male Luer Lock connector, a 7-inch standard bore tubing length, and a 0.5 mL priming volume. The extension set is not made with DEHP and is labeled for use with low-pressure power injectors up to 325 psi and a maximum flow rate of 10 mL/sec.

The standard bore design supports reliable fluid delivery for a wide range of infusion therapies, while the bonded MaxZero needle-free connector provides secure, needle-free access for medication administration, flushing, and vascular access maintenance. The pressure-rated construction makes the extension set suitable for compatible diagnostic imaging procedures in addition to routine IV therapy.

Key Benefits

The pressure-rated design supports use with compatible low-pressure power injectors up to 325 psi and flow rates up to 10 mL/sec.

The bonded MaxZero needle-free connector provides secure needle-free access for medication administration, flushing, and vascular access maintenance while helping reduce sharps exposure risks.

The standard bore tubing supports efficient fluid delivery for routine and specialty infusion therapies.

The integrated pinch clamp allows convenient manual flow control during setup, priming, transport, and infusion therapy.

The compact 7-inch tubing length supports organized IV line management while minimizing excess tubing.

The DEHP-free construction supports healthcare facilities seeking infusion products manufactured without DEHP-containing materials.

Compatibility and Applications

The BD MZ5303 Extension Set is compatible with standard Luer Lock IV systems, vascular access devices, infusion pumps, syringes, administration sets, MaxZero-compatible needle-free systems, and compatible low-pressure power injectors rated up to 325 psi.

Typical applications include IV medication administration, saline flushing, vascular access maintenance, diagnostic imaging procedures requiring compatible contrast injection, continuous infusion therapy, emergency medicine, critical care treatment, anesthesia support, oncology therapy, and outpatient infusion services.

This extension set is commonly used in hospitals, radiology departments, diagnostic imaging suites, emergency departments, operating rooms, intensive care units, infusion centers, oncology clinics, and outpatient treatment facilities.

Usage Guidelines

Use the BD MZ5303 only by trained healthcare professionals following manufacturer instructions, institutional protocols, and accepted infusion therapy standards. Before use, inspect the packaging to verify sterility, integrity, expiration date, pressure rating, and compatibility with the intended procedure.

Prime the extension set according to facility procedures and remove all air from the fluid pathway before patient connection. Verify secure attachment of the Spin Male Luer Lock connector, confirm proper operation of the pinch clamp, and disinfect the bonded MaxZero needle-free connector before every access.

When used with a compatible power injector, do not exceed the labeled pressure limit of 325 psi or the maximum flow rate of 10 mL/sec.

Certifications and Safety Standards

The BD MZ5303 Extension Set is manufactured under established medical device quality management systems and is intended to support safe infusion and vascular access practices in healthcare environments.

The sterile fluid pathway, pressure-rated construction, bonded MaxZero needle-free connector, standard bore tubing, and DEHP-free construction support healthcare initiatives related to medication safety, infection prevention, and infusion therapy quality.

Comparison with Competitor Products

Compared with standard extension sets not intended for power injection, the BD MZ5303 is pressure rated for compatible low-pressure power injectors up to 325 psi.

Compared with needle-access extension sets, the bonded MaxZero needle-free connector supports safer vascular access and streamlined medication administration.

The combination of pressure-rated performance, standard bore tubing, bonded MaxZero connector, pinch clamp, and DEHP-free construction makes this extension set suitable for both routine infusion therapy and compatible diagnostic imaging applications.

Typical User Profile and Application Scenarios

The BD MZ5303 is commonly used by radiology technologists, infusion nurses, vascular access specialists, emergency clinicians, critical care professionals, anesthesiologists, oncology nurses, and outpatient infusion teams.

Typical applications include compatible contrast-enhanced imaging procedures, IV medication administration, saline flushing, vascular access maintenance, emergency treatment, anesthesia support, oncology therapy, and specialty infusion protocols.

Best Practices for Use and Maintenance

Store the BD MZ5303 in a clean, dry environment according to manufacturer recommendations. Keep the extension set in its original sterile packaging until ready for use.

Use aseptic technique during setup and connection. Properly prime the tubing, disinfect the MaxZero needle-free connector before every access, verify secure Luer Lock connections, and ensure the pressure rating is appropriate for the intended power injector before use.

This extension set is intended for single-patient use only and should not be reused, reprocessed, or resterilized. Replace the set according to institutional protocols and manufacturer recommendations.

Regulatory and Safety Information

The BD MZ5303 Extension Set is intended for professional healthcare use only. It should be used according to manufacturer instructions, facility policies, vascular access guidelines, diagnostic imaging protocols, infection prevention practices, and applicable healthcare regulations.

Healthcare personnel should never exceed the labeled maximum pressure of 325 psi or maximum flow rate of 10 mL/sec when using compatible low-pressure power injectors.

Dispose of the used extension set according to facility policies and applicable biomedical waste regulations.

How to Order

Select the BD MZ5303 MaxZero Pressure Rated Standard Bore Extension Set with One Bonded MaxZero Needle-Free Connector, Pinch Clamp, Spin Male Luer Lock, 7 Inch Length, 0.5 mL Priming Volume, Not Made with DEHP, Sterile, and Labeled for Use with Low-Pressure Power Injectors up to 325 psi and a Maximum Flow Rate of 10 mL/sec and add it to your cart. Complete checkout with your preferred shipping and payment options. For bulk orders, quotes, product availability, or further assistance, contact CIA Medical customer service at (312)275-5850 or use the contact form on this page.