Carefusion 0P1776 - Dual Limb Ventilator Circuit, Compatible with MR600/MR700 Heated Humidifiers, 10 EA/CS

Carefusion 0P1776 - Dual Limb Ventilator Circuit, Compatible with MR600/MR700 Heated Humidifiers, 10 EA/CS

The Carefusion 0P1776 Dual Limb Ventilator Circuit is a high-quality, sterile, single-use respiratory circuit specifically designed for use with Fisher & Paykel MR600 and MR700 heated humidifiers. This adult-sized dual-limb system enables effective and controlled delivery of warmed, humidified medical gases in mechanical ventilation settings. Its robust construction, kink-resistant tubing, and compatibility with leading humidifiers make it a trusted solution in ICU, surgical, and respiratory care environments.

This circuit supports critical infection prevention efforts and provides consistent performance for clinicians and respiratory therapists managing patients on ventilators.

Key Benefits

• Seamless MR600/MR700 integration: Engineered for optimal humidity control and thermal regulation in adult ventilation.

• Dual-limb configuration: Ensures efficient separation of inspiratory and expiratory gas flow for accurate ventilation monitoring.

• Minimizes rainout and secretion buildup: Helps maintain airway moisture and prevent drying of mucosa.

• Flexible, kink-resistant tubing: Offers reliable airflow and accommodates patient positioning with ease.

• Disposable and sterile: Single-use design supports infection control and patient safety protocols.

Compatibility and Applications
Compatible with:

• Fisher & Paykel MR600 and MR700 heated humidifiers

• Most adult ventilators with dual-limb circuit connections

• Standard humidification chambers and heater wire setups

Applications include:

• Adult mechanical ventilation in ICUs and step-down units

• Perioperative respiratory management

• Long-term ventilated care (tracheostomy patients)

• Emergency and acute respiratory distress ventilation

Usage Guidelines

• Connect the inspiratory and expiratory limbs to their respective ports on the ventilator and humidifier.

• Ensure secure heater wire attachment for consistent temperature control.

• Check tubing for integrity, condensation, or blockages before use.

• Discard after each use or patient encounter, following facility infection control procedures.

Certifications, Safety Standards, and Regulatory Approvals

• FDA Cleared for respiratory ventilation

• Manufactured under ISO 13485 certified quality systems

• Constructed from latex-free, DEHP-free biocompatible materials

• Compliant with AARC and CDC recommendations for disposable ventilation circuits

Comparison with Competitor Products
The Carefusion 0P1776 offers:

• Precise compatibility with MR600/MR700 humidifiers for superior humidification results

• Stronger materials that resist tearing, kinking, or disconnection under continuous use

• Reduced risk of moisture pooling and system interruption

• Dependability from a trusted brand in respiratory care

Typical User Profile and Application Scenarios
Used by:

• Respiratory therapists and ICU clinicians

• Operating room and recovery unit nurses

• Anesthesia teams

• Long-term care respiratory specialists

Application scenarios:

• Adult critical care and life support ventilation

• ARDS, COPD, or pneumonia management

• Pre- and post-operative ventilatory support

• Tracheostomized patient care in sub-acute environments

Best Practices for Use and Maintenance

• Handle using aseptic technique to prevent contamination.

• Regularly inspect for moisture accumulation and clear condensate if present.

• Ensure heater wires are functioning before connecting to the patient.

• Store in a cool, dry, sterile environment.

• Replace the circuit after each patient or per protocol to maintain hygiene.

Regulatory and Safety Information
The Carefusion 0P1776 circuit meets critical regulatory and safety requirements for use in healthcare environments, offering dependable support in high-acuity ventilation with heated humidifiers. Its disposable format ensures compliance with infection control mandates and enhances patient safety.

How to Order
To order the Carefusion 0P1776 Dual Limb Ventilator Circuit (MR600/MR700 Compatible):

• Click Add to Cart and proceed through CIA Medicals secure checkout.

• For bulk pricing, product compatibility checks, or complete humidifier circuit kits, contact CIA Medical at (312) 275-5850 or use the Contact Form on this page.