Deroyal M227-XXL - Sleeved Vest with Shoulder Loops, XX-Large Size, Plaid Poly Style, Hook and Loop Closure, QR Ties Attachment, Each

Deroyal M227-XXL - Sleeved Vest with Shoulder Loops, XX-Large Size, Plaid Poly Style, Hook and Loop Closure, QR Ties Attachment, Each

• Easy to clean poly or breathable coolknit construction
• Longer sleeve design helps prevent patients from working arms out of vest
• Low neckline enhances patient comfort and safety
• Offset zipper or hook and loop back closure helps prevent pressure on spine
• Straps attach with quick-release (QR) ties or buckles
• Optional straps available to secure shoulder loops to the portion of the head of the bed that moves with the patient
• Color-coded binding for easy size identification

Indications

Intended Use

DeRoyal Vests are is intended to be used as a physical reminder for the patient to remain in the bed or wheelchair and for postural support.

Contraindications

• Do not use on a patient who is or may become highly aggressive or agitated.
• Never use on a patient if an I.V. or wound site could be compromised by the device.

Deroyal M227-XXL Sleeved Vest with Shoulder Loops Instructions for Use

• Place the patients arms through the sleeves or sleeve openings. NOTE: Patient should be sitting up while vest is being applied.
• Secure zipper or hook and loop closure in back. NOTE: Do not overtighten. Two fingers should fit between the device and the patient to ensure circulation is not compromised.
• Secure the straps to the portion of the bed frame or the wheelchair that moves with the patient using quick-release ties or quick-release buckles. Please refer to the instructions below.

Shoulder Strap Application (Not Available On All Styles)

If applying shoulder straps, take the end of the strap and feed it through the loop located on the shoulder portion of the vest. Feed the end of the strap up and over through the teeth of the buckle. Pull the strap completely through until it engages the buckle. Apply the other shoulder strap following the same instructions. Apply the straps to a portion of the head of the bed that moves with the patient using quick-release ties. Follow the quick-release ties application instructions below.

Quick-Release Ties

Wrap the strap(s) around the anchor once. Take the loose end of the strap(s) and create a loop. Cross the loop over the other strap(s) that is wrapped around the anchor and feed it through opening as if tying a shoelace. Hold that loop and create another loop with the loose strap(s) and feed it through the first loop. Pull the final loop and the strap(s) attached to the cuff in opposite directions to form a quick-release tie.

Quick-Release Buckles

Release the female end of the buckle and wrap its strap around the anchor. Pull the female portion through the loop and connect the male and female ends of the buckle. Pull the excess strap to tighten.