Smiths Medical 225-3445-300 - LINE GAS SAMPLING FEMALE/MALE CONNECTOR 10FTL COEXTRUDED 0.5IN ID (100/CS)

The Smiths Medical 225-3445-300 Gas Sampling Line is designed for reliable respiratory gas sampling in clinical and procedural environments where accurate monitoring and dependable tubing performance are essential. This 10 ft coextruded gas sampling line features a female/male connector configuration and a 0.5 in inner diameter to support secure connection and consistent gas pathway performance during patient monitoring applications.

Supplied 100 per case, this gas sampling line is suitable for healthcare facilities that require dependable disposable respiratory accessories for anesthesia, critical care, recovery, emergency care, and procedural monitoring workflows. Its coextruded tubing construction supports durability, flexibility, and stable performance during routine clinical use.

Key Benefits

• Designed for respiratory gas sampling and patient monitoring applications
• 10 ft tubing length provides practical reach between the patient interface and monitoring equipment
• Female/male connector configuration supports secure system connection
• Coextruded tubing helps provide strength, flexibility, and consistent performance
• 0.5 in inner diameter supports an appropriate gas pathway for compatible sampling systems
• Disposable format helps support infection control and workflow efficiency
• Bulk case packaging with 100 units supports high-volume clinical use
• Suitable for hospitals, surgical centers, emergency departments, and respiratory care settings

Compatibility and Applications

The Smiths Medical 225-3445-300 Gas Sampling Line is intended for use with compatible respiratory gas monitoring and anesthesia monitoring systems that accept female/male connector gas sampling lines. It may be used in environments where clinicians need to route sampled gases from the patient circuit or sampling point to compatible monitoring equipment.

Common applications include anesthesia gas monitoring, capnography support, respiratory assessment, procedural sedation monitoring, post-anesthesia care, emergency respiratory monitoring, and critical care observation. Compatibility should always be confirmed with the specific monitoring system, breathing circuit, and facility protocol before use.

Usage Guidelines

Before use, inspect the gas sampling line packaging and tubing to confirm that the product is intact, clean, and free from visible damage. Connect the female/male ends according to the compatible monitoring equipment instructions and ensure all connections are secure before patient monitoring begins.

Route the 10 ft tubing in a way that minimizes kinking, pulling, compression, or accidental disconnection. Avoid placing the line where it may interfere with patient movement, clinical access, or equipment operation. Use only as directed by trained healthcare professionals and follow the facilitys respiratory monitoring and infection control procedures.

Certifications and Safety Standards

Smiths Medical respiratory and monitoring accessories are manufactured for professional healthcare use and are expected to meet applicable medical device quality and safety requirements based on product classification and intended use. Facilities should review the product labeling, packaging, and manufacturer documentation for specific regulatory status, lot traceability, storage requirements, and any applicable safety information.

This product should be used only with compatible equipment and in accordance with the manufacturers instructions for use. Clinical staff should follow institutional policies for patient monitoring, single-patient use accessories, disposal, and infection prevention.

Comparison with Competitors

Compared with generic gas sampling lines, the Smiths Medical 225-3445-300 provides the advantage of a recognized medical device manufacturer, a practical 10 ft length, coextruded tubing construction, and a female/male connector format designed for clinical workflow compatibility. These features help support dependable connection, flexible routing, and consistent use across busy healthcare environments.

While lower-cost alternatives may appear similar, they may vary in tubing durability, connector fit, packaging consistency, and manufacturing quality controls. For facilities that prioritize reliable respiratory monitoring accessories and standardized supply purchasing, Smiths Medical gas sampling lines offer a strong balance of performance, clinical familiarity, and case-pack efficiency.

Typical User Profile and Application Scenarios

This gas sampling line is commonly used by anesthesiologists, certified registered nurse anesthetists, respiratory therapists, emergency clinicians, critical care nurses, perioperative teams, and biomedical support staff responsible for respiratory monitoring setup. It is especially useful in settings where accurate gas sampling and secure equipment connection are part of routine patient care.

Typical scenarios include operating room anesthesia cases, procedural sedation areas, recovery units, intensive care units, emergency departments, respiratory therapy departments, and ambulatory surgery centers. The 100 per case packaging supports inventory planning for facilities with frequent respiratory monitoring needs.

Best Practices for Use and Maintenance

Store the Smiths Medical 225-3445-300 Gas Sampling Line in a clean, dry environment away from excessive heat, moisture, direct sunlight, and contaminants. Keep products in their original packaging until needed to help maintain cleanliness and product readiness.

During setup, confirm the line is not twisted, kinked, or obstructed. Verify that all connector points are secure and that the monitoring system is functioning properly before and during patient use. Replace the line if it becomes damaged, contaminated, disconnected, or clinically unsuitable. Dispose of used products according to facility policy and applicable medical waste procedures.

Regulatory and Safety Information

The Smiths Medical 225-3445-300 Gas Sampling Line is intended for professional healthcare use by trained personnel. It should be used only for its intended respiratory gas sampling application and only with compatible monitoring equipment. Clinicians should review all product labeling and manufacturer instructions before use.

Do not use the product if the packaging is opened, damaged, or compromised. Do not attempt to reuse, reprocess, or modify disposable gas sampling lines unless the manufacturer specifically permits it. Follow institutional protocols for infection control, patient safety, equipment verification, and disposal of used respiratory accessories.

How to Order

Select the Smiths Medical 225-3445-300 LINE GAS SAMPLING FEMALE/MALE CONNECTOR 10FTL COEXTRUDED 0.5IN ID (100/CS) and add it to your cart. Complete checkout with your preferred shipping and payment options. For bulk orders, quotes, or further assistance, contact CIA Medical customer service at (312)275-5850 or use the contact form on this page.