Smiths Medical 3044 - Standard Oximetry Finger Sensor

The Smiths Medical 3044 Standard Oximetry Finger Sensor is a reusable SpO2 sensor designed for dependable pulse oximetry monitoring in clinical and professional care environments. Built for adult finger placement, this sensor supports routine oxygen saturation and pulse rate monitoring when used with compatible BCI pulse oximetry equipment and approved monitoring systems.

Its reusable design makes it a practical choice for hospitals, outpatient clinics, surgical centers, respiratory care settings, emergency departments, and other facilities that require consistent oximetry performance across repeated patient assessments.

Key Benefits

• Reusable finger sensor designed for adult pulse oximetry monitoring
• Supports accurate SpO2 and pulse rate readings when used with compatible equipment
• Standard finger placement helps simplify setup for trained clinical staff
• Durable construction supports repeated use in busy healthcare environments
• Suitable for routine spot checks and continuous monitoring applications, depending on the connected device
• Helps reduce the need for frequent disposable sensor replacement in appropriate care settings

Compatibility and Applications

The Smiths Medical 3044 Standard Oximetry Finger Sensor is intended for use with compatible BCI pulse oximeters and select approved monitoring systems that support this sensor configuration. It is commonly used in patient monitoring, respiratory assessment, recovery care, emergency evaluation, outpatient screening, and general vital signs workflows.

Healthcare buyers should confirm device compatibility, connector type, patient size requirements, and facility protocols before ordering. This sensor is best suited for adult patients where finger-based oximetry monitoring is clinically appropriate.

Usage Guidelines

• Use only with compatible monitoring equipment according to the device manufacturer instructions.
• Inspect the sensor, cable, and connector before each use for signs of wear, cracking, damage, or contamination.
• Place the sensor on a clean, dry adult finger with proper alignment for optimal signal quality.
• Avoid excessive motion, poor perfusion, nail polish, artificial nails, or strong ambient light when readings appear unstable.
• Follow facility cleaning and disinfection procedures between patients.
• Do not use the sensor if it is damaged or if readings are inconsistent after troubleshooting.

Certifications and Safety Standards

The Smiths Medical 3044 Standard Oximetry Finger Sensor should be used in accordance with applicable manufacturer instructions, facility infection control policies, and clinical monitoring guidelines. As a patient monitoring accessory, it should be handled by trained healthcare professionals familiar with pulse oximetry equipment and proper sensor placement.

Facilities should verify product labeling, packaging, regulatory status, and compatibility documentation before clinical use. Always follow the instructions supplied with the sensor and the connected monitoring device.

Comparison with Competitors

Compared with many generic or low-cost replacement oximetry sensors, the Smiths Medical 3044 offers a purpose-built option for facilities using compatible BCI monitoring platforms. Its reusable design can support long-term value where repeated adult finger monitoring is required.

Single-patient-use sensors may be preferred in certain infection control situations, while reusable finger sensors such as the Smiths Medical 3044 can be more efficient for routine monitored care when proper cleaning and disinfection procedures are followed. Compared with multi-site sensors, this standard finger design offers straightforward placement for adult patients where finger monitoring is appropriate.

Typical User Profile and Application Scenarios

The Smiths Medical 3044 Standard Oximetry Finger Sensor is commonly selected by hospitals, ambulatory surgery centers, emergency departments, respiratory therapy teams, outpatient clinics, long-term care facilities, and biomedical purchasing departments. It is suitable for teams that require a reliable reusable finger sensor for compatible pulse oximetry systems.

Typical applications include vital signs assessment, respiratory status checks, post-procedure monitoring, recovery room observation, emergency intake, clinical screening, and general oxygen saturation monitoring as part of a broader patient evaluation.

Best Practices for Use and Maintenance

• Store the sensor in a clean, dry location when not in use.
• Keep the cable loosely coiled to avoid strain, twisting, or connector damage.
• Clean and disinfect the sensor according to approved facility procedures and manufacturer guidance.
• Check for proper signal strength and waveform quality after placement.
• Remove the sensor and reposition it if the patient experiences discomfort or if readings become unreliable.
• Replace the sensor when it shows visible wear, compromised cable integrity, or repeated performance issues.

Regulatory and Safety Information

The Smiths Medical 3044 Standard Oximetry Finger Sensor is intended for professional healthcare use with compatible monitoring equipment. It is not a standalone diagnostic device and should not replace clinical judgment, patient assessment, or physician-directed care.

Pulse oximetry readings may be affected by patient movement, low perfusion, skin pigmentation, nail treatments, ambient light, sensor misalignment, and other clinical factors. Users should confirm unexpected readings through appropriate clinical evaluation and follow all applicable facility protocols.

How to Order

Select the Smiths Medical 3044 Standard Oximetry Finger Sensor and add it to your cart. Complete checkout with your preferred shipping and payment options. For bulk orders, quotes, or further assistance, contact CIA Medical customer service at (312)275-5850 or use the contact form on this page.