BD 10013186 - Alaris Pump Module Set with Check Valve, Dual Roller Clamps, 3 SmartSite Needle-Free Valves, 117 Inch Length, 20/CS (Continental US Only)
The BD 10013186 Alaris Pump Module Set is a sterile infusion administration set designed for use with compatible BD Alaris infusion pump systems. This configuration includes an integrated check valve, two roller clamps, and three SmartSite needle-free valves positioned at 6 inches, 37 inches, and 93 inches from the 2-piece male Luer Lock connector. One SmartSite valve is located above the pumping segment and two are located below the pumping segment.
The administration set features a 60 drops per liter drip factor, an overall tubing length of 117 inches, and a 25 mL priming volume. Designed to support complex infusion therapies, the set provides multiple access points for medication administration while helping maintain efficient fluid delivery and line management.
| Manufacturer | 10013186 |
| Application | IV Pump Set |
| Filter | Without Filter |
| Flow Control Type | Roller Clamp |
| Spike Type | Universal Spike |
| Type | Solution |
Key Benefits
The integrated check valve helps maintain directional fluid flow and may reduce the risk of unintended backflow during infusion therapy.
The three SmartSite needle-free valves provide convenient access points for medication administration, secondary infusions, and line management while helping reduce sharps exposure risks.
The dual roller clamp configuration allows healthcare professionals to control fluid flow during setup, priming, maintenance, and therapy adjustments.
The extended 117-inch tubing length offers flexibility in pump placement and patient positioning within a variety of clinical environments.
The sterile, single-use design supports infection prevention initiatives and helps minimize the risk of cross-contamination.
Compatibility and Applications
The BD 10013186 is intended for use with compatible BD Alaris infusion pump modules, IV administration systems, vascular access devices, extension sets, and Luer-compatible infusion accessories.
Typical applications include medication administration, maintenance fluid therapy, critical care infusions, oncology treatments, perioperative care, specialty medication delivery, and multi-drug infusion protocols.
This administration set is commonly utilized in hospitals, intensive care units, emergency departments, operating rooms, infusion centers, and outpatient treatment facilities.
Usage Guidelines
The BD 10013186 should be used only by trained healthcare professionals following manufacturer instructions, institutional policies, and prescribed infusion protocols.
Before use, inspect the packaging to verify sterility, integrity, and expiration date. Prime the administration set according to facility procedures and remove all air from the fluid pathway prior to patient connection.
Verify secure Luer Lock connections, proper check valve operation, and correct positioning of roller clamps before initiating therapy. Disinfect SmartSite needle-free valves according to facility protocols before each access.
Certifications and Safety Standards
The BD 10013186 Alaris Pump Module Set is manufactured under established medical device quality management systems and is intended to support safe infusion practices in healthcare environments.
The sterile fluid pathway, SmartSite needle-free technology, integrated check valve, and flow-control components support healthcare facility standards related to medication safety, infection prevention, and infusion management.
Comparison with Competitor Products
Compared with standard administration sets that provide limited access points, the BD 10013186 offers three strategically positioned SmartSite needle-free valves to support more flexible medication administration workflows.
Compared with sets lacking flow-control features, the integrated check valve and dual roller clamps provide enhanced control over fluid movement and infusion management.
The combination of extended tubing length, multiple access points, and compatibility with Alaris infusion systems makes this set well suited for advanced clinical applications.
Typical User Profile and Application Scenarios
The BD 10013186 is commonly used by infusion nurses, critical care clinicians, anesthesiologists, pharmacists, oncology specialists, vascular access professionals, and other healthcare personnel responsible for IV medication and fluid administration.
Typical applications include multi-medication infusion therapy, critical care treatment, oncology infusion protocols, perioperative medication administration, maintenance fluid delivery, and specialty infusion services.
Best Practices for Use and Maintenance
Store the BD 10013186 in a clean, dry environment according to manufacturer recommendations. Keep the administration set in its original sterile packaging until ready for use.
Use aseptic technique during setup and connection. Properly prime the tubing, verify clamp functionality, and ensure all SmartSite access points are disinfected before use.
This administration set is intended for single-patient use only and should not be reused, reprocessed, or resterilized. Replace the set according to institutional protocols and medication-specific requirements.
Regulatory and Safety Information
The BD 10013186 Alaris Pump Module Set is intended for professional healthcare use only. It should be used according to manufacturer instructions, facility policies, infusion pump guidelines, and applicable healthcare regulations.
Healthcare personnel should follow standard precautions, medication safety procedures, infection prevention practices, and infusion therapy standards throughout administration.
All used administration sets should be disposed of according to facility policies and biomedical waste regulations.
How to Order
Select the BD 10013186 Alaris Pump Module Set with Check Valve, Two Roller Clamps, Three SmartSite Needle-Free Valves, 117 Inch Length, 60 Drops per Liter Drip Factor, and 25 mL Priming Volume and add it to your cart. Complete checkout with your preferred shipping and payment options. For bulk orders, quotes, product availability, or further assistance, contact CIA Medical customer service at (312)275-5850 or use the contact form on this page.
BD #10015896, Alaris Pump Module Set with Check Valve, Dual 4-Way Stopcocks, 3 SmartSite Needle-Free Valves, 10/VS (Continental US Only)
