BD 24010-0007T - Alaris Pump Module Set with Check Valve, Roller Clamp, Pinch Clamp, 3 SmartSite Needle-Free Valves, 96", 74" and 6" Tubing, DEHP-Free, Sterile, 20/CS (Continental US Only)
The BD 24010-0007T Alaris Pump Module Set is a sterile, single-use IV infusion set designed for use with Alaris infusion pumps. It includes a check valve, roller clamp, pinch clamp, and three SmartSite needle-free valves, each strategically placed along the tubing at 96", 74", and 6" from the Texium closed male luer lock. The 126" total tubing length and 26 mL priming volume (PV) provide optimal performance for precise fluid delivery. Made without DEHP, this set supports medication compatibility and patient safety, particularly for sensitive populations.
Manufactured to the quality standards ofBD, this infusion set is engineered for reliable medication administration and seamless integration with Alaris infusion systems.
| Manufacturer | 24010-0007T |
| Application | IV Pump Set |
| Filter | Without Filter |
| Injection Port Type Grouping | Needle-Free Port |
| Type | Solution |
Key Benefits
The integrated SmartSite needle-free valves allow for multiple medication access points without the need for additional needles, reducing risk of sharps exposure. The check valve and pinch clamps offer improved flow control and line management. The 126" tubing length provides flexibility for patient movement and infusion system setup. DEHP-free construction supports compliance with patient safety standards and environmental concerns. Sterile, single-use packaging helps prevent contamination and infection.
Compatibility and Applications
This infusion set is compatible with Alaris infusion pumps, luer-lock syringes, needle-free connectors, and standard IV access devices. It is widely used in hospitals, infusion centers, emergency departments, and surgical units. Typical applications include continuous and intermittent medication administration, fluid infusion, and blood product transfusions in both pediatric and adult patients.
Usage Guidelines
The set is intended for use by trained healthcare professionals. Inspect packaging prior to use to confirm sterility and integrity. Prime the tubing according to institutional protocols to remove air and establish priming volume. Securely attach to the patients IV access point using aseptic technique. Adjust the flow rate and monitor the infusion as required. Dispose of the set after single-patient use in accordance with sharps and biohazard disposal policies.
Certifications, Safety Standards, and Regulatory Approvals
The BD 24010-0007T Alaris Pump Module Set is manufactured under FDA-regulated quality systems and complies with applicable medical device standards for sterile IV administration sets. The DEHP-free material construction meets safety standards for sensitive medication delivery and patient care, ensuring consistent performance and safe use in high-demand clinical settings.
Comparison with Competitor Products
Compared with non-DEHP IV sets, this configuration supports broader medication compatibility and aligns with patient safety initiatives. The inclusion of multiple SmartSite needle-free valves enhances workflow efficiency by enabling multiple access points with reduced need for repeated access. BD infusion sets are widely trusted for their high-quality construction, secure connections, and reliable flow performance.
Typical User Profile and Application Scenarios
This product is commonly used by infusion specialists, nurses, anesthesiologists, and clinical staff responsible for managing intravenous therapy. It is particularly effective in settings requiring safe, efficient medication delivery and where needle-free access is essential for patient and clinician safety.
Best Practices for Use and Maintenance
Store infusion sets in a clean, dry environment and use them before the labeled expiration date. Ensure secure connections before initiating infusion and monitor the infusion for potential complications, such as occlusion or infiltration. Follow institutional flushing, priming, and line monitoring protocols.
Regulatory and Safety Information
This sterile IV infusion set meets applicable FDA medical device regulations and established healthcare safety standards. Proper technique, secure attachment, and appropriate disposal are essential to protecting patients and healthcare professionals from infection and injury.
How to Order
Ordering the BD 24010-0007T Alaris Pump Module Set with SmartSite Needle-Free Valves and 126" Length is simple. Add the product to your cart and proceed through the secure checkout process. For bulk purchasing, institutional pricing, or additional assistance, contact CIA Medical customer service at (312) 275-5850 or use the contact form available on this page.
BD #24010-0007T, Alaris Pump Module Set with Check Valve, Roller Clamp, Pinch Clamp, 3 SmartSite Needle-Free Valves, 96", 74" and 6" Tubing, DEHP-Free, Sterile, 20/CS
