BD 10013361T - Alaris Pump Module Set Non-Vented with Texium Closed Male Luer, SmartSite Needle-Free Valves, Check Valve Roller Clamp and 118 Inch Sterile Fluid Path

BD 10013361T - Alaris Pump Module Set Non-Vented with Texium Closed Male Luer, SmartSite Needle-Free Valves, Check Valve Roller Clamp and 118 Inch Sterile Fluid Path

The BD 10013361T Alaris Pump Module Set is a sterile, non-vented administration set designed for use with compatible BD Alaris Pump Module infusion systems. This set includes a needle-free valve bag access port, check valve roller clamp, two SmartSite needle-free valves positioned 6 inches and 87 inches from the Texium closed male Luer, a 20 drop/mL drip factor, 118 inch overall length, and 298 cm priming volume.

This administration set is not made with DEHP and is intended to support controlled infusion therapy while providing needle-free access points and closed-system connection support through the Texium closed male Luer. The non-vented design is suitable for compatible flexible IV containers and facility-approved infusion workflows.

The sterile fluid path helps maintain product integrity until use and supports infection prevention practices during medication and fluid administration in professional healthcare environments.

Key Benefits

The BD 10013361T supports efficient infusion management through its combination of SmartSite needle-free valves, Texium closed male Luer connection, check valve roller clamp, and extended 118 inch tubing length. These features help clinicians manage medication delivery, line access, and flow control in compatible Alaris infusion workflows.

The two SmartSite needle-free valves provide convenient access points above and below the pumping segment, helping support medication administration, line management, and reduced reliance on needles during infusion care.

The Texium closed male Luer supports closed-system connection workflows when used with compatible components, helping facilities manage hazardous or sensitive medication handling according to institutional policy. The product is not made with DEHP, supporting material safety preferences in healthcare settings.

Compatibility and Applications

The BD 10013361T Alaris Pump Module Set is intended for use with compatible BD Alaris Pump Module systems and appropriate Texium and SmartSite components. Facilities should verify compatibility with their specific pump module, closed-system transfer workflow, medication requirements, and institutional protocols before use.

Typical applications include controlled IV medication administration, specialty medication infusion, oncology and hazardous drug workflows where compatible closed-system components are used, critical care infusions, perioperative medication delivery, and inpatient or outpatient infusion therapy.

This set is commonly used in hospitals, oncology departments, infusion centers, ambulatory care facilities, critical care units, pharmacy-supported infusion programs, and specialty treatment environments.

Usage Guidelines

Use the BD 10013361T only by trained healthcare professionals following BD instructions, facility infusion policies, medication handling requirements, and prescribed therapy protocols. Before use, verify product code, package integrity, sterility, expiration date, Alaris compatibility, Texium compatibility, and medication requirements.

Prime the set according to manufacturer instructions and facility procedure, ensuring the fluid path is free of air before patient connection. Confirm that the check valve roller clamp, SmartSite valves, bag access port, and Texium closed male Luer are properly connected and functioning as intended.

Do not use the set if the sterile package is damaged, opened, expired, or if any component appears compromised. Replace the set according to facility policy, medication requirements, and manufacturer guidance. Dispose of used components according to facility medical waste and hazardous drug handling procedures where applicable.

Certifications and Safety Standards

The BD 10013361T Alaris Pump Module Set is manufactured for professional medical use and provides a sterile fluid path for compatible infusion therapy applications. The needle-free access points, closed male Luer connection, and DEHP-free construction support modern infusion safety, material safety, and medication handling practices.

Healthcare facilities should verify current product labeling, regulatory status, pump compatibility, closed-system compatibility, sterility documentation, and compliance information through BD, CIA Medical, or authorized product documentation before clinical use.

Comparison with Competitor Products

Compared with basic administration sets, the BD 10013361T provides a more advanced configuration with two SmartSite needle-free valves, a needle-free valve bag access port, check valve roller clamp, and Texium closed male Luer connection.

Compared with non-closed Luer infusion sets, the Texium closed male Luer supports compatible closed-system connection workflows, which may be preferred for selected specialty or hazardous medication handling protocols. Compared with sets made with DEHP, this product supports facilities seeking infusion sets not made with DEHP.

Compared with shorter administration sets, the 118 inch length provides added flexibility for pump placement, patient movement, and bedside setup in complex care environments.

Typical User Profile and Application Scenarios

The typical users of BD 10013361T include infusion nurses, oncology nurses, critical care clinicians, pharmacists, anesthesia teams, vascular access professionals, emergency department staff, and supply teams managing Alaris-compatible infusion products.

Common scenarios include oncology infusion workflows, specialty medication administration, closed-system medication handling, critical care infusion therapy, perioperative medication delivery, inpatient IV therapy, and outpatient infusion treatments using compatible Alaris systems.

Best Practices for Use and Maintenance

Store the BD 10013361T Alaris Pump Module Set in a clean, dry medical supply area and keep it in its sterile packaging until ready for use. Rotate inventory by expiration date and inspect packaging before opening.

Confirm that the set matches the ordered therapy, pump module, medication safety requirements, and patient needs before setup. Use aseptic technique during priming, connection, and line access. Scrub needle-free valves according to facility policy before each access.

For medications requiring closed-system handling, confirm compatibility with facility-approved Texium components and follow institutional hazardous drug or specialty medication protocols. Do not reuse, reprocess, or resterilize the set.

Regulatory and Safety Information

The BD 10013361T Alaris Pump Module Set is intended for professional healthcare use only. It should be used with compatible Alaris Pump Module systems and according to manufacturer instructions, facility infusion policies, medication safety standards, and applicable healthcare regulations.

Users should follow standard precautions, air-in-line prevention practices, medication verification procedures, infusion pump programming protocols, needle-free connector disinfection practices, closed-system handling requirements where applicable, and medical waste disposal requirements.

How to Order

Select the BD 10013361T Alaris Pump Module Set Non-Vented with Needle-Free Valve Bag Access Port, Check Valve Roller Clamp, Two SmartSite Needle-Free Valves, Texium Closed Male Luer, Not Made with DEHP, 20 Drop/mL Drip Factor, 118 Inch Length, 298 cm Priming Volume, and Sterile Fluid Path and add it to your cart. Complete checkout with your preferred shipping and payment options. For bulk orders, quotes, product availability, or further assistance, contact CIA Medical customer service at (312) 275-5850 or use the contact form on this page.