BD 406122 - Epidural Tray with 18G x 3 1/2 Inch Perisafe Weiss Needle, Glass LOR Syringe, Lidocaine, Epinephrine, and Sodium Chloride

BD 406122 - Epidural Tray with 18G x 3 1/2 Inch Perisafe Weiss Needle, Glass LOR Syringe, Lidocaine, Epinephrine, and Sodium Chloride

The BD 406122 Epidural Tray is a sterile, disposable epidural single-shot tray designed for professional anesthesia, labor and delivery, surgical, and pain management environments. It includes an 18G x 3 1/2 inch BD Perisafe Weiss epidural needle with fixed wings, a 5 mL BD Epilor glass loss-of-resistance syringe with glass luer slip glass tip, lidocaine HCL 1% 5 mL, sodium chloride 0.9% 10 mL, and additional procedural components for epidural setup. BDs official specification lists this tray with lidocaine HCL 1.5% with epinephrine 1:200,000 5 mL, lidocaine HCL 1% 5 mL, and sodium chloride 0.9% 10 mL. :contentReference[oaicite:0]{index=0}

This tray helps anesthesia professionals prepare for epidural procedures by organizing commonly required components in one sterile configuration. The Perisafe Weiss epidural needle supports epidural access, while the glass LOR syringe is used by trained clinicians during the loss-of-resistance technique to help identify the epidural space. The included local anesthetic, epinephrine-containing local anesthetic, and saline components support procedural preparation according to medication labeling, patient assessment, clinician judgment, and facility protocol.

Key Benefits

• Complete epidural tray format helps reduce the need to gather multiple individual components before a procedure.
• 18G x 3 1/2 inch Perisafe Weiss epidural needle with fixed wings supports controlled handling during epidural access workflows.
• 5 mL Epilor glass LOR syringe supports loss-of-resistance technique during epidural space identification.
• Includes lidocaine HCL 1%, epinephrine-containing lidocaine, and sodium chloride 0.9% for compatible procedural use.
• Includes 30G x 1 inch needle, 25G x 1 1/2 inch needle, 18G x 1 1/2 inch needle, 20 mL Luer-Lok syringe, 5 mL Luer-Lok syringe, and 3 mL luer slip syringe as part of BDs listed configuration. :contentReference[oaicite:1]{index=1}
• Clear plastic fenestrated drape supports sterile field setup and procedural visibility.
• Sterile, disposable design supports infection control practices when used with strict aseptic technique.
• Case quantity of 10 supports inventory planning for anesthesia departments, operating rooms, labor and delivery units, and pain management facilities. :contentReference[oaicite:2]{index=2}

Compatibility and Applications

The BD 406122 is designed for epidural single-shot procedures performed by trained and qualified anesthesia professionals. It is suitable for hospitals, operating rooms, labor and delivery suites, ambulatory surgery centers, pain management clinics, and other procedural environments where an epidural anesthesia setup may be clinically indicated.

BD lists the tray as a standard epidural single-shot tray with a luer hub anesthesia needle, 20 mL Luer-Lok syringe, 5 mL Epilor glass LOR syringe, lidocaine, epinephrine-containing lidocaine, sodium chloride, povidone-iodine topical solution, prep sponge-sticks, and clear plastic fenestrated drape. :contentReference[oaicite:3]{index=3}

Usage Guidelines

• Use only by trained and qualified healthcare professionals experienced in epidural anesthesia techniques.
• Inspect the tray packaging before use and do not use if the sterile barrier is damaged, opened, expired, or compromised.
• Confirm the product number, needle gauge, needle length, medication contents, expiration date, and procedure requirements before opening.
• Use strict aseptic technique during preparation, skin antisepsis, draping, needle handling, loss-of-resistance technique, and medication administration.
• Review all included medications for concentration, expiration date, contraindications, allergy risk, preservative status where applicable, and patient-specific suitability before use.
• Use the epidural needle, LOR syringe, injection needles, lidocaine, epinephrine-containing lidocaine, sodium chloride, and syringe components only according to manufacturer instructions, medication labeling, anesthesia protocol, and facility policy.
• Do not reuse, reprocess, or resterilize tray components.
• Dispose of used needles, syringes, medication containers, and contaminated components according to sharps and regulated medical waste procedures.

Certifications, Safety Standards, and Regulatory Approvals

BD lists the 406122 as a sterile, disposable epidural single-shot standard tray sterilized by EO. The official BD specification lists GTIN each 00382904061227, GTIN case 50382904061222, and 10 units per case. :contentReference[oaicite:4]{index=4}

BD also lists a total shelf life of up to 2 1/2 years depending on component expiration dates. Storage guidance includes room temperature conditions of 20 to 25 degrees C, permitted excursions from 15 to 30 degrees C, and protection from freezing. These storage and handling requirements are important because the tray contains medication components and sterile procedure supplies. :contentReference[oaicite:5]{index=5}

Comparison with Competitor Products

The BD 406122 is best compared with epidural single-shot trays from manufacturers such as B Braun, Smiths Medical, ICU Medical, and other anesthesia tray suppliers. Compared with assembling separate epidural components, this BD tray provides a standardized sterile setup that can help reduce preparation time, support procedural consistency, and simplify purchasing for anesthesia departments.

Compared with continuous epidural trays, the BD 406122 is configured as an epidural single-shot tray and does not include an epidural catheter. This makes it more appropriate for single-shot epidural workflows rather than continuous catheter-based epidural analgesia. :contentReference[oaicite:6]{index=6}

Compared with BD epidural trays that include only lidocaine HCL 1% and sodium chloride, the BD 406122 includes an additional epinephrine-containing lidocaine component. Compared with 17G epidural tray configurations, this model uses an 18G x 3 1/2 inch Perisafe Weiss epidural needle with fixed wings, which may be preferred by facilities standardizing around this needle gauge and configuration.

Typical User Profile and Application Scenarios

The typical users of the BD 406122 include anesthesiologists, certified registered nurse anesthetists, anesthesia assistants where permitted, pain management physicians, and trained operating room, labor and delivery, or procedural support teams.

This tray is most relevant in clinical scenarios requiring a sterile epidural single-shot setup with an 18G x 3 1/2 inch Perisafe Weiss epidural needle, glass LOR syringe, lidocaine, epinephrine-containing lidocaine, sodium chloride, supporting needles, syringes, skin preparation components, and clear fenestrated drape. Common use environments include labor and delivery anesthesia support, surgical anesthesia workflows, perioperative pain management, outpatient procedural anesthesia, and pain management settings where the clinician determines that epidural technique is appropriate.

Best Practices for Use and Maintenance

• Store trays according to BDs stated temperature guidance and protect them from freezing.
• Rotate stock by earliest expiration date because usable shelf life may depend on the shortest-dated component in the tray.
• Keep trays in original packaging until ready for use.
• Verify all medication labels, concentrations, and expiration dates before preparation or administration.
• Confirm the epinephrine-containing lidocaine concentration on the tray label before use, especially where distributor descriptions and clinical preference cards may vary.
• Maintain a sterile field throughout the procedure and discard any component if sterility is compromised.
• Confirm that patient monitoring, emergency medications, and resuscitation support are available according to facility anesthesia policy.
• Use the LOR syringe, epidural needle, injection needles, medication components, syringes, and drape only for their intended procedural roles.
• Dispose of all used sharps immediately in an approved sharps container.

Regulatory and Safety Information

The BD 406122 is intended for professional medical use in epidural anesthesia workflows. Epidural procedures involve significant clinical risk and should only be performed by trained clinicians following institutional policy, patient assessment, medication labeling, and accepted anesthesia practice standards.

Do not use this tray if the package is damaged, if any component is missing or compromised, if medication labeling is unclear, if the product is expired, or if the tray configuration does not match the intended procedure. The included lidocaine HCL, epinephrine-containing lidocaine, and sodium chloride 0.9% should be used only when clinically appropriate and according to medication labeling and facility protocol.

How to Order

Select the BD 406122 Epidural Tray: 18G x 3" Perisafe Weiss Epidural Needle Fixed Wings, 5mL Epilor Syringe LOR Glass LS Glass Tip, Lidocaine HCL (1%) with Epi (1:200,000) 5mL, Lidocaine HCL (1%) 5mL, Sodium Chloride (0.9%) 10mL, 30G x 1" Needle, 25G x 1" Needle, 18G x 1" and add it to your cart. Complete checkout with your preferred shipping and payment options. For bulk orders, quotes, availability confirmation, or further assistance, contact CIA Medical customer service at (312) 275-5850 or use the contact form on this page.