BD MZ5306 - Pressure Rated Minibore Extension Set with Bonded MaxZero Needle-Free Connector, 7 Inch Length, 0.4 mL Priming Volume, 50/CS (Con

BD MZ5306 - Pressure Rated Minibore Extension Set with Bonded MaxZero Needle-Free Connector, 7 Inch Length, 0.4 mL Priming Volume, 50/CS (Con

The BD MZ5306 Pressure Rated Minibore Extension Set is a sterile IV extension set designed for vascular access management, medication administration, and compatible contrast media delivery in professional healthcare settings. This configuration features one bonded MaxZero needle-free connector, no clamp, a Spin Male Luer Lock connector, a 7-inch minibore tubing length, and an ultra-low 0.4 mL priming volume. The extension set is manufactured without DEHP and is specifically labeled for use with compatible low-pressure power injectors up to 325 psi with a maximum flow rate of 10 mL/sec.

The compact minibore design minimizes residual fluid volume while supporting efficient infusion performance. The bonded MaxZero connector provides secure needle-free access, making this extension set suitable for routine IV therapy as well as compatible diagnostic imaging procedures that require pressure-rated extension tubing.

Key Benefits

The pressure-rated construction is labeled for use with compatible low-pressure power injectors up to 325 psi and a maximum flow rate of 10 mL/sec.

The bonded MaxZero needle-free connector provides reliable needle-free access for medication administration, flushing, and vascular access maintenance while helping reduce sharps exposure risks.

The ultra-low 0.4 mL priming volume helps minimize residual medication and contrast media within the fluid pathway.

The minibore tubing supports efficient low-volume fluid delivery while maintaining a compact infusion profile.

The DEHP-free construction supports healthcare facilities seeking infusion products manufactured without DEHP-containing materials.

Compatibility and Applications

The BD MZ5306 is compatible with standard Luer Lock IV systems, compatible vascular access devices, infusion pumps, administration sets, syringes, and low-pressure power injectors operating within the manufacturer's specified limits of up to 325 psi and 10 mL/sec.

Typical applications include IV medication administration, saline flushing, vascular access maintenance, contrast media delivery for compatible diagnostic imaging procedures, outpatient infusion therapy, emergency care, and critical care support.

This extension set is commonly used in radiology departments, CT imaging suites, hospitals, emergency departments, outpatient imaging centers, infusion centers, and ambulatory care facilities.

Usage Guidelines

Use the BD MZ5306 only by trained healthcare professionals following manufacturer instructions, institutional protocols, and accepted infusion therapy standards. Before use, inspect the packaging to verify sterility, integrity, expiration date, and compatibility with the intended procedure.

Prime the extension set according to facility procedures and remove all air from the fluid pathway before patient connection. Verify secure attachment of the Spin Male Luer Lock connector and ensure the bonded MaxZero connector is properly disinfected before each access.

When using a compatible low-pressure power injector, do not exceed the labeled operating limits of 325 psi or a maximum flow rate of 10 mL/sec. Always follow the injector manufacturer's instructions and institutional imaging protocols.

Certifications and Safety Standards

The BD MZ5306 Extension Set is manufactured under established medical device quality management systems and is intended to support safe infusion and vascular access practices in healthcare environments.

The sterile fluid pathway, pressure-rated construction, bonded MaxZero needle-free connector, and DEHP-free materials support healthcare facility initiatives related to medication safety, infection prevention, and imaging workflow efficiency.

Comparison with Competitor Products

Compared with conventional extension sets that are not pressure rated, the BD MZ5306 is specifically labeled for use with compatible low-pressure power injectors up to 325 psi and 10 mL/sec.

Compared with extension sets featuring larger fluid volumes, the ultra-low 0.4 mL priming volume helps reduce residual medication or contrast media and supports efficient fluid delivery.

The bonded MaxZero connector provides a permanently attached needle-free access point that simplifies line management while supporting secure vascular access.

Typical User Profile and Application Scenarios

The BD MZ5306 is commonly used by radiology technologists, infusion nurses, vascular access specialists, emergency department clinicians, critical care professionals, anesthesiologists, and other healthcare personnel responsible for IV therapy and compatible diagnostic imaging procedures.

Typical applications include contrast-enhanced CT imaging using compatible low-pressure injectors, medication administration, saline flushing, vascular access maintenance, emergency treatment, and specialty infusion therapy.

Best Practices for Use and Maintenance

Store the BD MZ5306 in a clean, dry environment according to manufacturer recommendations. Keep the extension set in its original sterile packaging until ready for use.

Use aseptic technique during setup and connection. Properly prime the tubing, disinfect the MaxZero connector before each access, and ensure all Luer Lock connections remain secure throughout therapy or imaging procedures.

This extension set is intended for single-patient use only and should not be reused, reprocessed, or resterilized. Replace the set according to institutional protocols and manufacturer recommendations.

Regulatory and Safety Information

The BD MZ5306 Extension Set is intended for professional healthcare use only. It should be used according to manufacturer instructions, facility policies, vascular access guidelines, and applicable healthcare regulations.

For pressure-assisted procedures, healthcare personnel should operate only within the labeled limits of up to 325 psi and a maximum flow rate of 10 mL/sec, while following the manufacturer's instructions for both the extension set and the compatible power injector.

Dispose of the used extension set according to facility policies and applicable biomedical waste regulations.

How to Order

Select the BD MZ5306 Pressure Rated Minibore Extension Set with One Bonded MaxZero Needle-Free Connector, No Clamp, Spin Male Luer Lock, DEHP-Free Construction, 7 Inch Length, 0.4 mL Priming Volume, Sterile Fluid Path, and Labeling for Use with Compatible Low-Pressure Power Injectors up to 325 psi and 10 mL/sec, then add it to your cart. Complete checkout with your preferred shipping and payment options. For bulk orders, quotes, product availability, or further assistance, contact CIA Medical customer service at (312)275-5850 or use the contact form on this page.